Question 1

How much does pressure washing cost in Ipswich?

Accepted Answer

There is no honest fixed price, because two drives of the same size can be very different jobs. Cost depends on the area to be cleaned, the surface type, how much build-up there is, access, whether a treatment is needed for lichen or black spot, whether re-sanding is required, whether you want sealing, and how runoff and drainage need handling. Send photos and a rough size and you will get a specific figure rather than a range.

Question 2

Can you quote from photos?

Accepted Answer

Yes, for most drives and patios. Two or three clear photos plus a rough size and your postcode is usually enough. Larger, awkward or commercial sites are better looked at in person.

Question 3

Do you clean block paving?

Accepted Answer

Yes — it is a large part of the work. See the block paving cleaning page for the full sequence, including clearing the joints and re-sanding.

Question 4

Do you re-sand block paving?

Accepted Answer

Yes, with kiln-dried jointing sand, once the joints are dry enough to take it. It is quoted separately so you can see what it costs.

Question 5

Do you seal driveways?

Accepted Answer

Where the surface is suitable and you want it. Sealing is optional, needs a clean and properly dry surface, and is not right for every drive.

Question 6

Can you remove black spot?

Accepted Answer

Often it can be cleared or greatly improved with an appropriate treatment and time. On very old, heavily affected stone, expect strong improvement rather than a promise of perfection.

Question 7

Do you clean sandstone patios?

Accepted Answer

Yes, at lower pressure with a wider fan. Sandstone is softer than it looks and aggressive cleaning leaves it open-grained.

Question 8

Can you pressure wash resin?

Accepted Answer

Some resin-bound surfaces can be cleaned gently. It depends on the system, its age and condition. If it looks likely to fret or lose stone, we will say so rather than risk it.

Question 9

Do you need access to water?

Accepted Answer

An outside tap covers most jobs. If there is no tap available, mention it when asking for a quote so it can be planned for.

Question 10

Do I need to be home?

Accepted Answer

Not necessarily, as long as we have access to the area and to water, and you are happy for the work to go ahead. Most people are in for at least part of the visit.

Question 11

How long does pressure washing take?

Accepted Answer

A typical domestic drive or patio is a half day; larger areas, heavy growth or re-sanding take longer. Anything that needs a dry surface may run into a second visit.

Question 12

How long before I can use my driveway?

Accepted Answer

You can normally walk on it straight away. After re-sanding, keeping vehicles off for a few hours lets the joints settle and gives a better result.

Question 13

Do you work in Kesgrave?

Accepted Answer

Yes — Kesgrave, Rushmere, Purdis Farm and Broke Hall are regular areas, along with the rest of Ipswich and nearby villages.

Question 14

Which parts of Ipswich do you cover?

Accepted Answer

Ipswich town centre, Castle Hill, Whitton, Whitehouse, Chantry, Stoke Park, Maidenhall, California, Rushmere, Broke Hall, Priory Heath, Gainsborough, Holywells, Purdis Farm and Kesgrave, plus Martlesham, Woodbridge, Hadleigh and Capel St Mary.

Question 15

Do you do commercial work?

Accepted Answer

Yes — shop fronts, entrances, paths, forecourts, communal paving and small yards, usually outside trading hours.

Question 16

What happens if it rains?

Accepted Answer

Light rain rarely stops cleaning. It does affect anything that needs a dry surface, so re-sanding or sealing may be moved to another day rather than rushed.

Question 17

Is pressure washing suitable for old paving?

Accepted Answer

Often yes, but with more care and lower expectations. Old paving may be worn, cracked or have failed pointing. We check the condition first and tell you what improvement is realistic.

Pressure Washing FAQs

Question not answered?